Roof estimating and quoting software for Australian roofers.
Don't lose half a day driving to a job that goes to someone else. Estimate it from the aerial first: trace the roof, get the quantities, send a quote they accept on their phone — in minutes, before you commit to a site visit.
A first estimate in about ten minutes from the yard — check it on site before you order · Your first 3 real roofs or 30 days free, whichever comes first, no card · Month to month, cancel any time · Or book a 15-min setup call
Pick the satellite picture, turn it square, click the corners, choose the roof type. RoofMap draws the ridges, hips and valleys and measures every edge. Two minutes, and nothing to sign up for. The numbers themselves are in the app.
Loading the playground…
The playground saves nothing and sends nothing. When you are ready for the numbers, start free — your first 3 real roofs or 30 days, no card.
Start free on one of your roofs
Want the detail? Watch the full six-minute walkthrough — the job pack, the order email, the customer's side of the quote and the Fergus link.
Draw the roof. Type the address and RoofMap loads the aerial photo and sets the scale from it. Click the corners of the building; walls snap square, and the ridges, hips and valleys are worked out from the outline and the pitch. Every edge is measured as you go.
Generate the job pack. The same drawing becomes the sheet layout for every plane, the cut list, the flashing schedule and the fixings — and shows where the hip offcuts come from. It goes to the crew as a PDF they can read on the roof.
The customer picks an option. The quote is a six-page proposal with the roof plan on it. The customer chooses steel grade, gauge, guttering or whether the garage is in, watches the total move, and accepts from their phone. You are told the moment they open it and the moment they accept.
Send the material order. Quantities are counted off the drawing and the order goes to your merchant with one button. Linked to Fergus, the job pack goes back to the Fergus job as well.
The same job that used to mean a tape, a spreadsheet, a biro sketch for the crew and three phone calls to the customer.
Trace the outline over the aerial, set one known wall, and every ridge, hip, valley, barge and gutter is measured. The crew gets a plan they can read, not a sketch.
Sheet runs laid out per plane, the flashing schedule, back-trays, fixings. An editable PDF you can change, not a spreadsheet you have to maintain.
The merchant order comes off the same counts that built the job pack. Nothing retyped, nothing counted twice, nothing left off the docket.
A live quote where the customer changes steel grade, gauge and guttering and watches the price move. No ringing you up to ask what it would cost.
Not a generic job-management app with roofing bolted on. Every part of it was built for one trade.
Gable, hip, Dutch gable, mono-pitch, stepped gutters, penetrations — drawn to scale and pitch-corrected, so what the plan says is what turns up on the truck.
How the measuring works →Sheet runs laid out per plane, flashings itemised by type and length, back trays worked out from the penetrations you drew.
Inside the job pack →Your price book, your labour rates, your scaffold. The gross profit sits on screen while you price, not in a spreadsheet afterwards.
Plans and pricing →A real proposal with the roof plan on it. They choose their steel grade, gauge and guttering, watch the total move, and accept from their phone.
See the customer quote →The home board is your job list and every job keeps its own files — no other software needed. If you run Fergus, quotes and material orders land there too instead of being typed in twice.
RoofMap and Fergus →Everyone shares the same jobs, price book and job numbers — and every job says who made it and who sent the order.
The Team plan →This is the part most quoting software doesn't have. Draw the roof on your phone or tablet while you're standing on it — and every ridge, hip, valley, barge and gutter is measured as you go, ready for the office before you're back in the ute.
RoofMap came out of a working roofing company in Northland, New Zealand. It was built because quoting a re-roof took an afternoon of tape measures and spreadsheets, and because the material order was never quite right.
Every feature in it earned its place on a real job first. That's why the cut lists match how a roof is actually laid, and why the app works with one hand on a windy roof.
COLORBOND®, ZINCALUME®, LYSAGHT®, CUSTOM ORB®, TRIMDEK®, KLIP-LOK® and SPANDEK® are registered trade marks of BlueScope Steel Limited.
Measure the roof, calculate your materials, export your pricing, and get back to running the business. Your estimator, your office manager and your foreman all work off the same jobs, the same price book and the same job numbers.
Measuring is included on every plan, with no per-roof fee. Per-report measuring services charge roughly A$35–$60 a roof to measure it for you — twenty roofs a month is A$700 to $1,200 before you have priced anything.
Month to month, no contract · Cancel any time and stop paying · Your data stays yours
Prices in AUD, billed from New Zealand. No GST for ABN-registered businesses. Measure covers 30 roofs a month, Trade 100 and Team as many as you like. Every plan starts with your first 3 real roofs or 30 days of Team free, whichever comes first, no card. More than five people? Talk to us.
Prefer yearly? Two months free.
Your first 3 real roofs or 30 days free, whichever comes first, no card. A worked example is already in there — a real re-roof, measured, priced and quoted — so you can see what it produces before you draw anything of your own. The practice roof never counts as one of the three.
Start free — 3 roofs or 30 days, no cardWould rather be walked through it? Request a 15-minute setup call and we will load your own supplier rates with you.
Already using RoofMap? Sign in
